Gestetner B130 Service Manual page 215

SERVICE PROGRAM
5
Mode Number/Name
837 Program Checksums
901 Printer Free Run
902 Test Pattern Print
1
906* Exhaust-Fan Control Timer
1
907* Plug & Play Setting
908* C1a/C1b Select
1
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
Displays checksums of the contents of the machine's
SRAM.
•
The screen shows three check sums: "SUM" (total
checksum, "B" (boot sum), and "M" (main sum).
•
If you have used SP-827 to download new firmware,
be sure to reboot the software before running this SP. (If
you don't reboot, the screen will show checksums for the
previous firmware.)
Starts a printer free run.
[0 = No / 1 = Yes]
•
For details about free runs:
•
After selecting "1", press the OK key (or the
twice to start the free run. Press
Prints a test pattern. (
Inputs the fan control time.
[30 ~ 120 / 30 / 1 s/step]
The fan maintains existing speed for the specified time
before slowing or stopping (after occurrence of an SC or
following entry into warm-up, standby, or low-power
mode).
Selects the brand name and production name for the Plug
and Play function (for Windows 95 and up). These names
are registered in the SRAM. If the SRAM becomes
defective, these names should be re-registered.
•
Use the Right or Left cursor key to scroll through the
list of brand names. To select a brand name, press the
Original Type key and the OK (or
time. The LCD displays an asterisk (*) next to the
number of the currently selected brand name.
•
After displaying any of the brand names, you can view
the corresponding production name by holding down the
Darker key. (If the production name is too long to fit on
the screen, you can view the rest of the name by holding
down both the Darker and Lighter keys).
•
To exit, press
Selects whether the machine identifies itself as a C1a
(B045) or C1b (B044/B046) when reporting to firmware.
[0 = no setting / 1 = C1a / 2 = C1b]
•
You can visually identify the machine is C1a or C1b
by its bypass. C1a machines have 1-sheet bypass; C1b
machines have 100-sheet bypass.
•
If the setting is "0", the machine automatically checks
its own bypass type to determine how to report itself.
5-74
CÓPIA NÃO CONTROLADA
Function/[Setting]
5.1.7.
to stop the free run.
5.1.2)
) key at the same
or the Cancel key.
key)
SM