Gestetner B130 Service Manual page 231

SERVICE PROGRAM
5.1.10 SERIAL NUMBER INPUT
Specifying Characters
SP5-811-001 specifies the serial number. For the B129 basic model (the machine
without the controller box), and the B044/B045/B046 models, use the numeric
keypad to input serial number information. For other models (the machine with the
controller box), use the numeric keypad and the multi-function panel.
B129 and B044/B045/B046
A serial number consists of 11 characters. You can change each character by
pressing one of the first 11 keys on the numeric keypad (
For example, when you press the
changes as follows: 0 → 1 → 2 → ... → 8 → 9 → A → B → ... → X → Y → Z.
When the key is pressed, the second character changes likewise.
You can specify a digit ("0" to "9") or a capital letter ("A" to "Z") for the first four
characters of a serial number, and specify a digit in the other seven characters (not
capital letters).
B130/B168/B169
Use the numeric keypad to type numbers. In addition, use the multi-function panel
to type other characters. When you press the "ABC" key, the letter changes as
follows: A → B → C. To input the same letter two times, for example "AA," press
the "ABC" key, the "Space" key, and the "ABC" key. To switch between uppercase
letters and lowercase letters, press the "Shift" key.
Serial Number and NVRAM
Serial numbers are stored in the NVRAM before shipment and are not cleared by
any program. You must specify a serial number after you replace the NVRAM.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
key, the first character of the serial number
5-90
CÓPIA NÃO CONTROLADA
Rev. 11/2004
, , , ... , , ).
SM