Toner Supply; Toner-Bottle Models - Gestetner B130 Service Manual

6.16.3 TONER SUPPLY

Toner-Bottle Models

[D]
[E]
[C]
[B]
When toner bottle [A] is pushed in, shutter [B] is pushed open by the PCU body.
Pressing in lever [C] pulls off toner bottle cap [D], which is held by chuck [E]. When
clutch [F] turns the bottle, the spiral grooves push toner out at [G], and the turning
Mylar blades [H] push this toner through slit [I] into the developing unit. Toner
collection coil [J] simultaneously recycles toner retrieved from the OPC drum. The
recycled toner slides down chute [K] and enters the developing unit through slit [L].
NOTE: The toner and developer used in the B129/B130/B168/B169 models are
different than that used in the B044/B045/B046 models. (The
B129/B130/B168/B169 toner has a lower melting point.) The toner and
developer are not interchangeable between the B044/B045/B046 and the
B129/B130/B168/B169.
SM
CÓPIA NÃO CONTROLADA
[A]
B046D306.WMF
6-39
CÓPIA NÃO CONTROLADA
DEVELOPMENT
[F]
[H]
[B]
[L] [K]
B129 Series/B044 Series
[G]
[I]
[J]
B046D307.WMF