Gestetner B130 Service Manual page 643

SERVICE RAM ADDRESSES
4000DC(H) - User parameter switch 28 (SWusr_1C)
Number of rings in TEL mode (User tools)
(This switch is not printed on the user parameter list.)
Number of rings
00
!
99
4000DD(H) to 4000EF - User parameter switch 29 to 47 (SWusr_1D to 2F)
Bits 0 to 7: Not used
400130 to 400143(H) - RTI (Max. 20 characters - ASCII) - See the following note.
400159 to 400178(H) - TTI 1 (Max. 32 characters - ASCII) - See the following note
400179 to 40018C(H) - CSI (Max. 20 digits - ASCII)
4001D5(H) - Number of CSI digits (Hex)
If the number of characters is less than the maximum (20 for RTI, 32 for TTI), add a
stop code (FF[H]) after the last character.
4001D8 to 4001E6(H) - Service station's fax number (Max. 15 digits - ASCII)
4001F6 to 400204(H) - Own fax number: PSTN (Max. 15 digits - ASCII)
400250(H) - ID code (low - BCD)
400251(H) - ID code (high - BCD)
400252(H) - Confidential ID (low - BCD)
400253(H) - Confidential ID (high - BCD)
400254(H) - Memory Lock ID (low - BCD)
400255(H) - Memory Lock ID (high - BCD)
400273 to 40027D(H) – Daylight-saving time (Summer time)
Amount of time shift
400273(H) – Amount of time shift
1-0xFF(H) minutes,
Start date/time:
400274(H) - Month (BCD)
400275(H) - Week (Hex)
400276(H) - 00: Monday, 01: Tuesday, 02: Wednesday, .... , 06: Sunday
400277(H) - Hour (BCD)
400278(H) - Day (BCD)
End date/time:
400279(H) - Month (BCD)
40027A(H) - Week (Hex)
40027B(H) - 00: Monday, 01: Tuesday, 02: Wednesday, .... , 06: Sunday
40027C(H) - 24-Hour (BCD)
40027D(H) - Day (BCD)
B465
CÓPIA NÃO CONTROLADA
Hex value to program (BCD)
00
!
➨
99
[Service Function 09]
00(H)= 60 minutes
5-50
CÓPIA NÃO CONTROLADA
SM