Gestetner B130 Service Manual page 619

BIT SWITCHES
Communication Switch 1C
No. FUNCTION
0 Extension access code (8 and
9) to turn V.8 protocol On/Off
1
0: On
1: Off
2–7 Not used
Communication Switch 1D - Not used (do not change any of these settings)
Communication Switch 1E - Not used (do not change any of these settings)
Communication Switch 1F - Not used (do not change any of these settings)
B465
CÓPIA NÃO CONTROLADA
Refer to communication switch 1B.
Example: If "8" is the PSTN access code, set bit 0
to 1. When the machine detects "8" as the first
dialed number, it automatically disables V.8
protocol. (If "9" is the PSTN access code, use bit 1.)
Do not change these settings.
5-26
CÓPIA NÃO CONTROLADA
COMMENTS
SM