Gestetner B130 Service Manual page 217

SERVICE PROGRAM
SP6-XXX (Peripherals)
6
Mode Number/Name
006 ADF Registration
1 Side-to-Side
2 Leading Edge
3 Trailing Edge Erase
007 ADF Sub-scan Magnification
1
009 ADF Free Run
910 ADF/Printer Free Run
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
Adjusts the side-to-side registration for DF mode.
[–9.0 ~ +9.0 / 0.0 / 0.1 mm/step] IAJ
Use the key to select "+" or "–" when entering the
value.
Adjusts the leading edge registration for DF mode.
[–5.0 ~ +5.0 / 0.0 / 0.1 mm/step] IAJ
0.1 mm/step
Use the key to select "+" or "–" when entering the
value.
Adjusts the trailing edge erase margin for DF mode.
[–3.0 ~ +3.0 / –1.0 / 0.1 mm/step] IAJ
Use the key to select "+" or "–" when entering the
value.
Adjusts the actual magnification ratio in the sub-scan
direction, for DF mode.
[–0.9 ~ +0.9 / 0.0 / 0.1%/step] IAJ
Use the key to select "+" or "–" when entering the
value.
Performs a DF free run .
[0 = No / 1 = Yes]
•
For details about free runs:
•
After selecting "1", press OK or
run. Press
Performs a free run of the DF and printer.
[0 = No / 1 = Yes]
•
For details about free runs:
•
After selecting "1", press OK or
run. Press
5-76
CÓPIA NÃO CONTROLADA
Function/[Setting]
5.1.7.
to stop.
5.1.7.
to stop.
twice to start the
twice to start the
SM