Smc Print (Sp5-990) - Gestetner B130 Service Manual

5.1.15 SMC PRINT (SP5-990)

B129/B130/B168/B163:
SP5-990 outputs machine status lists.
1. Select SP5-990.
2. Select a menu:
• B129: 001 All, 002 SP, 003 User Program, 004 Logging Data, or 005 Big
Font
• B130/B168/B169: 001 All, 002 SP, 003 User Program, 004 Logging Data,
005 Diagnostic Report, 006 Non-Default, 007 NIB Summary, 021 Copier UP,
022 Scanner SP, 023 Scanner UP
NOTE: The output given by the menu "Big Font" is suitable for faxing.
3. Press the "Execute" key.
• B129: The copy mode is activated (
5.1.1). Specify copy settings and press the
is output.
• B130/B168/B169: The machine status list is output.
4. To return to the SP mode, press the
B044/B045/B046:
1. Access SP5-992.
2. Select the type of data you wish to print: "1" to print SP settings only, "2" to
print all system parameters (including SP settings), or "3" to dump a selected
memory range.
3. If you selected "3", press the OK key and then use the cursor and numeric keys
to enter the address range to be dumped.
4. Press to access the copy mode display.
5. Select the print conditions (paper size, print density, etc).
6. Press again to print the list.
7. Press to exit from copy mode.
8. Press as necessary to exit this SP.
NOTE: This report only requires the copier to print. it does not need the printer
or fax option to generate the report.
SM
CÓPIA NÃO CONTROLADA
"Activating Copy Mode" in section
key.
5-101
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM
key. The machine status lists
B129 Series/B044 Series