Gestetner B130 Service Manual page 40

COPIER
46. B046 only: Access SP5-992 and select "2" to print out a full SMC report.
Confirm that the report shows a "YES" for SP7-801-3.
47. B046 only: After connecting the telephone line to the appropriate telephone
wall jack and LINE press the On Hook key on the fax operation panel, and
confirm that you hear a dial tone coming from the monitor speaker.
48. Program the required items, as indicated below.
49. Exit the SP Mode now.
Initial Programming: Faxless models (B044, B045)
Items to Program (Service Level – SP Mode
Date and time
Language replacement (Firmware download)
*1: See Section 5 for SP-mode usage instructions.
Items to Program (User Level)
Display contrast
Energy saver level (low power mode)
Reception mode
Other items, as necessary
*2: Refer to the Operating Instructions for details.
Initial Programming: Fax-equipped model (B046)
Items to Program (Service Level – Service Functions
Country code (System switch 0F)
Protocol requirements (G3 switch 0B) - EU only
PM call (System switch 01 – bit 0)
Country code (NCU parameter 00)
Service station's fax number
*3: See Section 5.1.1 of the fax service manual for information about using
service functions.
Items to Program (Service Level – SP Mode)
Machine's serial number
Language replacement (Firmware download)
PSTN access code (RAM address 4000DB)
PSTN access method (RAM address 4000CD)
Periodic service call (RAM addresses 40054F to 400553)
*4: See Section 5 for SP-mode usage instructions.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
*2
1-12
CÓPIA NÃO CONTROLADA
)
*1
SP No.
5-302
5-827
User Tools
User Tools →
System Settings
*2
*3
) Function No.
01
01
01
07
09
*4
SP No.
5-811
5-827
7-955
Rev.11/2004
SM