Gestetner B130 Service Manual page 201

SERVICE PROGRAM
8 801 Toner Remain
This SP displays the percent of toner remaining for each color. This SP allows
the user to check the toner supply at any time.
Note:
•
This precise method of measuring remaining toner supply (1% steps) is
better than other machines in the market that can only measure in
increments of 10 (10% steps).
•
This SP is expanded for color MFP and color LP machines. For this
machine, the count is done for black only.
8 941 Machine Status
These SPs count the amount of time the machine spends in each operation
mode. These SPs are useful for customers who need to investigate machine
operation for improvement in their compliance with ISO Standards.
8 941 1 Operation Time
8 941 2 Standby Time
8 941 3 Energy Save Time
8 941 4 Low Power Time
8 941 5 Off Mode Time
8 941 6 Down Time/SC
8 941 7 Down Time/PrtJam
8 941 8 Down Time/OrgJam
8 941 9 Down Time/TonEnd
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
[0~100/ 0 / 1/step]
[0~9999999/ 0 / 1/step]
Engine operation time. Does not include time while
controller is saving data to HDD (while engine is not
operating).
Engine not operating. Includes time while controller
saves data to HDD. Does not include time spent in
Energy Save, Low Power, or Off modes.
Includes time while the machine is performing
background printing.
Includes time in Energy Save mode with Engine on.
Includes time while machine is performing
background printing.
Includes time while machine is performing
background printing. Does not include time machine
remains powered off with the power switches.
Total down time due to SC errors.
Total down time due to paper jams during printing.
Total down time due to original jams during scanning.
Total down time due to toner end.
5-60
CÓPIA NÃO CONTROLADA
SM