Gestetner B130 Service Manual page 219

SERVICE PROGRAM
7
Mode Number/Name
801 ROM Versions and Option Connections
Note: SP7-801 cannot be accessed at the screen. This information appears on SMC
printouts only. (Go to SP5-992 and select "2" to print out all data. The SP-801
information will appear in the "LOG DATA" section on the second page of the printout.
[ 5.1.5])
1 Firmware Version
2 No meaning (Fixed at "VER. 1")
3 Fax Unit ["Yes" = installed, "No" = Not installed]
4 Printer Unit ["Yes" = installed, "No" = Not installed]
5 ADF ["Yes" = installed, "No" = Not installed]
6 Optional Memory ["No" (None installed), "32MB", "40MB", "64MB"]
7 Paper Tray Unit ["Yes" = installed, "No" = Not installed]
8 Bypass Type ["1" = 1 sheet / "100" = 100-sheet]
803* PM Counter Display
1
804 PM Counter Reset
1
807 SC/Jam Counter Reset
1
808 Reset Counters
1
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
Shows software versions and option connection statuses.
Displays the PM counter value (the count since the last
PM).
Resets the PM counter.
[0 = No / 1 = Yes]
After selecting "1", hold down the Original Type key and
press the OK key (or
reset is successful, the display shows "Action completed."
If the reset fails, the display shows "Error!!!".
Resets the SC counter and all jam counters.
[0 = No / 1 = Yes]
After selecting "1", hold down the Original Type key and
press the OK key (or
reset is successful, the display shows "Action completed."
If the reset fails, the display shows "Error!!!".
Resets all counters, except for the total counter (SP7-
003).
[0 = No / 1 = Yes]
After selecting "1", hold down the Original Type key and
press the OK key (or
reset is successful, the display shows "Action completed."
If the reset fails, the display shows "Error!!!".
5-78
CÓPIA NÃO CONTROLADA
Function/[Setting]
key) to execute the reset. If the
key) to execute the reset. If the
key) to execute the reset. If the
SM