Gestetner B130 Service Manual page 566

18. Connect the fax operation panel's
connector [A] to the connector on the
copier's operation panel.
19. Connect the speaker's connector [B] to the connector [C] extending out from
the copier's operation panel.
20. Attach the fax operation panel to the copier with the 2 screws ([D] and [E])
removed at Step 15. For the upper screw [E], be sure to use the shorter,
headless screw.
NOTE: If you mistakenly use the longer screw at [E], the screw will block the
action of the scanner.
21. Remove the small cover [F], then attach the
copy key top [G].
22. Reattach the platen cover.
23. Affix the packed decal(s)/label(s) on the
front cover as shown.
Example: Super G3 decal [H]
24. Insert the telephone cable into the
socket labeled "LINE" at the rear of the machine.
25. Plug in the machine and turn the main power switch on.
NOTE: Be sure to plug the machine in to a properly grounded outlet.
SM
CÓPIA NÃO CONTROLADA
[E]
[D]
[H]
1-7
CÓPIA NÃO CONTROLADA
[B]
[A]
FAX UNIT
[C]
B465I512.WMF
[G]
[F]
B465I109.WMF
B465I111.WMF
B465