Ps 2 Emulation Board (B431) - Gestetner B130 Service Manual

PS 2 EMULATION BOARD (B431)

1.3 PS 2 EMULATION BOARD (B431)
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install the Postscript option, the printer option (B441) must be installed
also. Please refer to section 1.2 for the printer controller installation
procedure.
[A]
1. Remove the rear cover [A] (5 screws).
2. Remove the controller board [B] from the machine (1 harness and 8 screws or
6 screws if no fax option).
3. Connect the PS 2 emulation board [C] to CN505 on the controller board.
4. Replace the controller board assembly in the machine.
5. Replace the rear cover.
B441
CÓPIA NÃO CONTROLADA
[B]
B441I501.WMF
[C]
1-4
CÓPIA NÃO CONTROLADA
B441I505.WMF
B441I503.WMF
SM