Gestetner B130 Service Manual page 49

31. Pull the excess length of the heater's
harness out the opening at the rear
[A].
NOTE: Be sure that the harness
passes on the side of the
grounding plate [B] at the
bottom of the opening. (The
front of the grounding plate
must remain clear.)
32. Arrange the excess harness length so
that it sits beneath the FCU cover
plate.
33. Attach the caution decals to the
locations shown in the illustration.
34. Reassemble the copier.
35. Plug in the power cord, and verify
component operation.
SM
CÓPIA NÃO CONTROLADA
[B]
1-21
CÓPIA NÃO CONTROLADA
PAPER TRAY UNIT HEATER
[A]
B046I522.WMF
B046I523.WMF
B129 Series/B044 Series