Gestetner B130 Service Manual page 629

NCU PARAMETERS
Address
401434 International dial tone frequency
upper limit (high byte)
401435 International dial tone frequency
upper limit (low byte)
401436 International dial tone frequency
lower limit (high byte)
401437 International dial tone frequency
lower limit (low byte)
401438 International dial tone detection time
401439 International dial tone reset time
(LOW)
40143A International dial tone reset time
(HIGH)
40143B International dial tone continuous
tone time
40143C International dial tone permissible
drop time
40143D International dial wait interval (LOW)
40143E International dial wait interval (HIGH)
40143F Country dial tone upper frequency
limit (HIGH)
401440 Country dial tone upper frequency
limit (LOW)
401441 Country dial tone lower frequency
limit (HIGH)
401442 Country dial tone lower frequency
limit (LOW)
401443 Country dial tone detection time
401444 Country dial tone reset time (LOW)
401445 Country dial tone reset time (HIGH)
401446 Country dial tone continuous tone
time
401447 Country dial tone permissible drop
time
401448 Country dial wait interval (LOW)
401449 Country dial wait interval (HIGH)
40144A Time between opening or closing the
DO relay and opening the OHDI
relay
40144B Break time for pulse dialing
40144C Make time for pulse dialing
40144D Not used
B465
CÓPIA NÃO CONTROLADA
Function
5-36
CÓPIA NÃO CONTROLADA
Unit
Hz (BCD) If both addresses contain
FF(H), tone detection is
disabled.
Hz (BCD) If both addresses contain
FF(H), tone detection is
disabled.
20 ms If 401438 contains FF,
the machine pauses for
the pause time (40143D /
40143E).
Belgium: See Note 2.
Hz (BCD) If both addresses contain
FF(H), tone detection is
disabled.
Hz (BCD) If both addresses contain
FF(H), tone detection is
disabled.
20 ms If 401443 contains FF,
the machine pauses for
the pause time (401448 /
401449).
1 ms See Notes 3, 6 and 7.
Function 07–0
(parameter 11).
1 ms See Notes 3 and 7.
Function 07-0 (parameter
12).
1 ms See Notes 3 and 7.
Function 07-0 (parameter
13).
Do not change the setting.
Remarks
SM