Gestetner B130 Service Manual page 235

SERVICE PROGRAM
SRAM Data Download (SP5-825)
NOTE: 1) Be sure to turn off the main switch before inserting or removing the
flash memory card. Installing or removing a card while the main switch
is on may damage the FCU.
2) This operation will overwrite all of the machine's current SRAM data.
1. Turn off the main switch.
2. Insert the flash memory card [A] into the card slot, with the card's "B" side
facing the rear of the machine. (See illustration on page 5-32.)
3. Turn on the main switch.
4. Access SP 5-825.
5. Enter "1" at the keypad, and then press OK.
6. The machine executes the download. This operation takes about 2 seconds.
On successful completion, the screen displays "Loading completed."
NOTE: If uploading fails, the "Loading error!!!" message appears. If this occurs,
try repeating the procedure.
7. Turn off the main switch, then remove the memory card.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
5-94
CÓPIA NÃO CONTROLADA
SM