Service Program - Gestetner B130 Service Manual

Rev. 11/2004
5. SERVICE TABLES

5.1 SERVICE PROGRAM

IMPORTANT
Do not let the user access the SP mode or the SSP mode. Only service
representatives are allowed to access these modes. The machine operation
is NOT guaranteed after any person other than service representatives
accesses the SP mode or the SSP mode.
5.1.1 USING SP AND SSP MODES
The following two modes are available:
• SP Mode (Service Program Mode): The SP Mode includes the programs that
are necessary for standard maintenance or troubleshooting activities.
(B130/B168/B169 ONLY)
• SSP Mode (Special Service Program Mode): The SSP Mode includes SP-
Mode programs and some special programs. Extra knowledge of machine
operation is required to use these special programs. For details, consult your
supervisor.
Starting SP Mode
1. Type the keys as follows:
2. Press the key and hold it down until the SP-mode menu is displayed (about
3 seconds).
SM
CÓPIA NÃO CONTROLADA
[A]
[B]
/ O K
[E]
→ →
5-1
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM
[C]
1 2 3
4 5 6
7 8 9
0 #
[F]
→
B129 Series/B044 Series
[D]
B130S903.WMF