Gestetner B130 Service Manual page 236

Rev. 11/2004
5.1.12 FIRMWARE UPDATE PROCEDURE FOR B129
This section illustrates how to update the firmware of the B129 (the machine
without the controller box). To update the firmware of the B130/B168/B169 models
(the machine with the controller box), see section 5.2.
1. Turn the main power switch off.
2. Remove the memory card cover [B]
( x 1).
3. Turn the face of the flash memory card
[A] ("A" is printed on it) to the rear of the
copier, and insert it into the card slot [C].
4. Press down the power switch on the
operation panel and hold it, and turn
on the main power switch.
5. Press the "Execute" key [D]. The
program starts running.
6. Do not touch any key while the
message "Load Status..." is displayed.
This message indicates that the
program is running.
7. Check that the message "End Sum..."
is displayed. This message indicates
that the program has ended normally.
8. Turn off the main power switch.
9. Remove the flash memory card.
10. Attach the memory card cover.
11. Turn the main power switch on, and
check the operation.
SM
CÓPIA NÃO CONTROLADA
5-95
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM
[C]
[B]
COPY
5.827.001 Program Download
Execute
[D]
COPY
5.827.001 Program Download
Load Status: –
Execute
COPY(Class3)
5.827.001 Program Download
End Sum: H 0.20 EXP
B129 Series/B044 Series
[A]
B130S901.WMF
B130S904.WMF
B130S905.WMF
B130S906.WMF