Replacement And Adjustment; Exterior Cover; Original Table - Gestetner B130 Service Manual

1. REPLACEMENT AND ADJUSTMENT

1.1 EXTERIOR COVER

1. Open the upper cover [A].
2. Front cover [B] ( x 1)
3. Rear cover [C] ( x 1)

1.2 ORIGINAL TABLE

CAUTION: Do not damage the latches on the bottom.
[B]
1. Open the platen cover [A] (when the ADF main body is kept installed).
2. Slowly push the original table [B] to the left, and release the three latches on
the bottom.
Reinstalling
Use caution not to damage the three latches on the bottom. Make sure that the
contact area around each latch is flush against the cover (! 1.5.2).
SM
CÓPIA NÃO CONTROLADA
[B]
1
CÓPIA NÃO CONTROLADA
EXTERIOR COVER
[C]
[A]
[A]
B696R901.WMF
B696R907.WMFF
B696