Service Tables And Procedures; Accessing Ifax Bit Switches - Gestetner B147 Service Manual

3. SERVICE TABLES AND PROCEDURES

3.1 ACCESSING IFAX BIT SWITCHES

1. Ensure that the machine is in standby mode.
2. Press , enter   with the 10-key pad, then hold down  for more
than 3 seconds. The SP mode main menu opens.
3. Touch "Fax SP" on the touch-panel to enter the fax service mode.
4. Use SP1102 1~16 to set the bit switches for IFAX. For details, refer to the
Service Tables on the following pages.

WARNING
Never adjust a bit switched marked "DFU" or "Japan Only," as this may
cause the machine to malfunction or to operate in a manner that is not
accepted by local regulations. Such bits are for use only in other areas,
such as Japan.
NOTE: Default settings for bit switches are not listed in this manual. Refer to the
System Parameter List print out.
SM
ACCESSING IFAX BIT SWITCHES
9 IFAX