Deleting Id-Codes - Olivetti d-Copia 52 Operation Manual

COPIER MANAGEMENT
63
6. Enter the limit for the number of copies that can be made using the numeric keys. The
limit is set in units of 1000's of sheets, up to a maximum of 250,000.
* Entering "0" enables unlimited copying.
* If "CANCEL" key is touched, the registered ID-code is cleared and a new ID-code
can be entered.
7. Touch the "REGISTER" key. The display will return to the screen in step 4.
* To register another ID-code, repeat steps 4 to 7.
8. Touch the "END" key.
The display will return to the screen in step 3.
9. Touch the "END" key.
The display will return to the copy management mode setting screen.
10. Touch the "END" key.
The touch panel will return to the basic screen.

Deleting ID-codes

1. Set the copy management mode. (page 61)
2. Touch the "SET CODE" key.
3. Touch the "DELETE" key.
4. Touch the ID-code to be deleted directly. (Plural codes are possible.)
If it is not displayed, scroll the " " or " " key to be displayed.
5. To finish deleting, touch the "END" key.
The display will return to the screen in step 3.
6. Touch the "END" key.
The display will return to the copy management mode setting screen.
7. Touch the "END" key.
The touch panel will return to the basic screen.