Secversionreset - HP StorageWorks 2/64 - Core Switch Command Reference Manual

secVersionReset

Resets the security version stamp to 0.
Synopsis
secversionreset
Availability
admin
Description
Use this command to reset the security version stamp of all switches in a fabric to 0, so that it can be
joined to another secure fabric.
When merging two or more secure fabrics:
1. Determine which secure fabric will become the FCS_POLICY controller fabric: the dominant fabric to
which all other secure fabrics will be merged.
2. Use the secPolicyAdd, secPolicyRemove, and
FCS_POLICY of the merging fabrics to match the FCS_POLICY of the controller fabric. All secure
fabrics to be merged must have identical FCS_POLICY lists. The FCS policies of merged fabrics must
match exactly; they must contain the same FCS members and in the same order, or the merge will fail.
3. Reset the version stamp using the
into the controller fabric. The controller fabric does not require a version reset.
4. Cascade the fabrics together. When the secure fabrics merge, the primary FCS switch in the controller
fabric propagates its security policies across the newly formed fabric.
NOTE: This command must be issued from a sectelnet or SSH session and can be issued only from the
primary FCS switch, a non-FCS when there is no FCS switch in the fabric, or from a disabled switch.
Operands
none
Example
To reset the version stamp to 0:
switch:admin> secversionreset
About to reset version stamp to 0.
Are you sure (yes, y, no, n):[no] y
done.
Security Policy Version Stamp has been set to 0.
See also
secFabricShow
secModeDisable
secModeShow
secTransAbort
614 Fabric OS commands
secPolicyActivate
command on each secure fabric to be merged
secVersionReset
commands to modify the