Secfcsfailover - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
secFCSFailover
Enables a backup FCS switch to take over as primary FCS switch.
Synopsis
secfcsfailover
Availability
admin
Description
Use this command to enable a backup FCS switch to take over as the primary FCS switch.
This command can be issued only on a backup FCS switch. After this command is issued, the primary
FCS switch aborts its current transaction and moves the backup FCS switch to the top of the FCS list. The
former primary FCS switch then activates the new policy set and the former backup FCS switch becomes
the new primary FCS switch in the fabric.
The purpose of this command is to recover from a scenario in which all available access to the primary
FCS switch is lost, such as the Ethernet and serial connections.
Operands
none
Examples
To enable a backup FCS switch to take over as the primary FCS switch:
switch:admin> secfcsfailover
This switch is about to become the Primary FCS switch.
All transactions of the current Primary FCS switch will be aborted.
ARE YOU SURE
WARNING!!!
The FCS policy of Active and Defined Policy sets have been changed.
Review them before you issue secPolicyActivate again.
See also
secFabricShow
secModeDisable
secModeShow
566 Fabric OS commands
(yes, y, no, n): [no] y
Advertisement
Table of Contents
