Savecore - HP StorageWorks 2/64 - Core Switch Command Reference Manual

saveCore

Saves or removes core files created by daemons.
Synopsis
To FTP core files:
savecore [[-f core-file-list]... | ] [-h ip-address] [-u user_name | -a] [-p
password][-d remote_directory]
To remove core files:
savecore [[-r core-files-directory-list]... | ]
To list core files:
savecore -l
Availability
admin
Description
Use this command to FTP core files, to remove core files, or to list core files. With no arguments,
enters interactive mode.
saveCore
Options
This command has the following options:
-h ip-address
-u user_name
-p password
-a
-d remote_directory
-f core-file-directory-list
-R
-r core-files-directory-list
-l
Specify a host name if FTP requires it.
Specify a user name for the host name; default is
anonymous.
Specify a password for the user name.
Specify to use anonymous FTP to download the core
files. This option cannot be used with the -u option.
Specify the name of the remote directory into which the
core files are copied. The directory will be created if it
does not already exist. It is assumed that the user has
sufficient privilege to create files at this location.
Specify a list of the core file directories to transfer to a
remote site. This list can be comma-separated directory
list or just a single directory name. Only the standard
core files directories can be specified (/core_files
and /mnt/core_files); all other files or directories
are ignored.
Specify this option to remove all core files.
Specify this option to remove core files under the
directory list given. Removes all the core files under the
listed directories. The directory list is a comma-separated
list of core files directory and other files, if any, will be
ignored. No confirmation will be made before removal.
Specify this option to list all core files.
Fabric OS 5.x command reference guide 549