Qloopdelete - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
qloopDelete
Deletes a QuickLoop.
Synopsis
qloopdelete "name"
Availability
admin
NOTE:
This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to delete a QuickLoop.
This command changes the Defined Configuration. For the change to be preserved across switch reboots,
it must be saved to non-volatile memory using the
effective, an appropriate zone configuration must be enabled using the
NOTE:
When security is enabled, this command can be issued only from the primary FCS switch.
Use this command only with Fabric OS 3.x systems in the fabric; QuickLoop is not supported in Fabric
OS 5.x.
Operands
The following operand is required:
name
Examples
To delete QuickLoop "qloop2":
switch:admin> qloopDelete "qloop2"
See also
qloopAdd
qloopCreate
qloopRemove
qloopShow
540 Fabric OS commands
cfgSave
Specify the name of the QuickLoop, in quotation marks. This
operand is required.
command. For the change to become
cfgEnable
command.
Advertisement
Table of Contents
