Show Spantree Portfast - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
vlan vlan-id
Defaults: None.
Access: All.
Usage: The command lists information separately for each VLAN.
Examples: The following command shows information about blocked ports on a
DWS-1008# show spantree blockedports vlan default
Port
------------------------------------------------------------------------
6
Number of blocked ports (segments) in VLAN 1 : 1
The port information is the same as the information displayed by the show spantree
command. See Output for show spantree.

show spantree portfast

Displays STP uplink fast convergence information for all network ports or for one or more
network ports.
Syntax: show spantree portfast
port-list
Defaults: None.
Access: All.
Examples: The following command shows uplink fast convergence information for all ports:
D-Link Systems, Inc.
VLAN name or number. If you do not specify a
VLAN, MSS displays information for blocked
ports on all VLANs.
switch for the default VLAN (VLAN 1):
Vlan Port-State
190 Blocking
List of ports. If you do not specify any ports, MSS displays uplink
fast convergence information for all ports.
Cost Prio Portfast
4 128 Disabled
port-list
[ ]
STP Commands
243