Clear Radius Server; Clear Server Group - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Syntax:
Defaults:
Access:
Examples:
DWS-1008# clear radius proxy port all
success: change accepted.

clear radius server

Removes the named RADIUS server from the switch configuration.
Syntax:
server-name
Defaults:
Access:
Examples:
DWS-1008# clear radius server rs42
success: change accepted.

clear server group

Removes a RADIUS server group from the configuration, or disables load balancing for the
group.
Syntax:
group-name
load-balance
Defaults:
Access:
Usage:
D-Link Systems, Inc.
clear radius proxy port all
None.
Enabled.
The following command clears all RADIUS proxy port entries from the switch:
clear radius server server-name
Name of a RADIUS server configured to perform
remote AAA services for the switch.
None.
Enabled.
The following command removes the RADIUS server rs42 from a list of
remote AAA servers:
clear server group group-name [load-balance]
Name of a RADIUS server group configured to
perform remote AAA services for switches.
Ability of group members to share demand for
services among servers.
None.
Enabled.
Deleting a server group removes the server group from the configuration.
However, the members of the server group remain.
RADIUS Commands
303