D-Link DWS-1008 Cli Reference Manual page 82

DWS-1008 CLI Reference Guide
set snmp profile
Configures an SNMP notification profile.A notification profile is a named list of all the notification
types that can be generated by a switch, and for each notification type, the action to take
(drop or send) when an event occurs. You can configure up to ten notification profiles.
Syntax: set snmp profile {default | profile-name} {drop | send} {notification-type | all}
default | profile-name
drop | send
notification-type
D-Link Systems, Inc.
Name of the notification profile you are creating or modifying. The
profile-name can be up to 32 alphanumeric characters long, with
no spaces. To modify the default notification profile, specify
default.
Specifies the action that the SNMP engine takes with regard to
the notifications you specify with notification-type or all.
Name of the notification type:
• AuthenTraps - Generated when the switch's SNMP engine
receives a bad community string.
• AutoTuneRadioChannelChangeTraps - Generated when the
RF Auto-Tuning feature changes the channel on a radio.
• AutoTuneRadioPowerChangeTraps - Generated when the
RFAuto-Tuning feature changes the power setting on a radio.
• ClientAssociationFailureTraps - Generated when a client's
attempt to associate with a radio fails.
• ClientAuthorizationSuccessTraps - Generated when a client
is successfully authorized.
• ClientAuthenticationFailureTraps - Generated when
authentication fails for a client.
• ClientAuthorizationFailureTraps - Generated when
authorization fails for a client.
• ClientClearedTraps - Generated when a client's session is
cleared.
• ClientDeAssociationTraps - Generated when a client is
dissociated from a radio.
IP Services Commands
81