D-Link DWS-1008 Cli Reference Manual page 399

DWS-1008 CLI Reference Guide
Field
BOOT Index
BOOT TYPE
DEVICE
FILENAME
FLAGS
OPTIONS
test
Displays or changes the state of the poweron test flag.The poweron test flag controls whether
a DWS-1008 performs a set of self tests prior to the boot process.
Syntax: test [ON | on | OFF | off]
ON
on
OFF
off
Defaults: The poweron test flag is disabled by default.
Access: Boot prompt.
D-Link Systems, Inc.
Output for show
Description
Boot profile slot, which can be a number
from 0 to 3.
Boot type:
• c - Compact flash. Boots using
nonvolatile storage or a flash card.
• n - Network. Boots using a TFTP server.
Location of the system image file:
• c: - Nonvolatile storage area containing
boot partition 0
• d: - Nonvolatile storage area containing
boot partition 1
• e: - Primary partition of the flash card in
the flash card slot
• f: - Secondary partition of the flash card
in the flash card slot
• boot0 - boot partition 0
• boot1 - boot partition 1
System image file name.
Number representing the bit settings of
boot flags to pass to the booted system
image.
String up to 128 bytes of boot options to
pass to the booted system image.
Enables the poweron test flag.
Same effect as ON.
Disables the poweron test flag.
Same effect as OFF.
Boot Prompt Commands
398