D-Link DWS-1008 Cli Reference Manual page 44

DWS-1008 CLI Reference Guide
Examples: The following command displays information for all ports on the DWS-1008:
DWS-1008# show port status
Port Name
=============================================================
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
The table below describes the fields in this display.
Field
Port
Name
Admin
Oper
Config
Actual
Type
Media
D-Link Systems, Inc.
Admin Oper Config Actual
up up auto
up down auto
up down auto
up down auto
up up auto
up down auto
up down auto
up down auto
Description
Port number.
Port name. If the port does not have a name, the port number is listed.
Administrative status of the port:
• up - The port is enabled.
• down - The port is disabled.
Operational status of the port:
• up - The port is operational.
• down - The port is not operational.
Port speed configured on the port:
• 10 - 10 Mbps.
• 100 - 100 Mbps.
• 1000 - 1000 Mbps.
• auto - The port sets its own speed.
Speed and operating mode in effect on the port.
Port type:
• ap - AP access point port
• network - Network port
• wa - Wired authentication port
Link type:
• 10/100BaseTX - 10/100BASE-T.
• 1000BaseT - 1000BASE-T.
Type
100/full network
network
network
network
100/full ap
network
network
network
Port Commands
Media
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
43