Clear Dot1X Timeout Supplicant - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Examples:
DWS-1008# clear dot1x reauth-max
success: change accepted.
clear dot1x reauth-period
Resets the time period that must elapse before a reauthentication attempt, to the default time
period.
Syntax:
Defaults:
Access:
Examples:
DWS-1008# clear dot1x reauth-period
success: change accepted.
clear dot1x timeout auth-server
Resets to the default setting the number of seconds that must elapse before the switch
times out a request to a RADIUS server.
Syntax:
Defaults:
Access:
Examples:
DWS-1008# clear dot1x timeout auth-server
success: change accepted.

clear dot1x timeout supplicant

Resets to the default setting the number of seconds that must elapse before the switch
times out an authentication session with a supplicant (client).
D-Link Systems, Inc.
Type the following command to reset the maximum number of reauthorization
attempts to the default:
clear dot1x reauth-period
The default is 3600 seconds (1 hour).
Enabled.
Type the following command to reset the default reauthentication time period:
clear dot1x timeout auth-server
The default is 30 seconds.
Enabled.
To reset the default timeout for requests to an authentication server, type the
following command:
802.1x Management Commands
313