Download
Share
Print this page
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DWL-P200
  6. Quick installation manual

D-Link DWL-P200 Quick Installation Manual

Power over ethernet adapters
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Warning: Please follow the
instructions in this guide carefully.
Connecting these adapters
incorrectly may result in damage to
you network devices.
About Power Over Ethernet.
The DWL-P200 Power Over Ethernet (POE) Adapters are designed to supply
operational power to a Network Device. These adapters eliminate the need to use an
additional AC/DC power supply at the Network Device giving you the ability to mount
an Network Device virtually anywhere in a building where power outlets are not
available, ( for example in, ceilings, attics). D-Link's DWL-P200 Adapters take
advantage of the unused cable pairs within Ethernet Cat 5 cabling. The Base Unit
inserts DC voltage into the unused wires therefore allowing the single Category 5
cable to carry both Ethernet data and DC power to an Network Device. The POE
Terminal Unit splits the data and DC power apart, which is then supplied to the
Network Device.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice.
DWL-P200 Base Unit and Terminal Unit
Ethernet (CAT5 UTP/Straight Through) Cable
Female-to-Female Power Connector
48V DC Power Adapter
1
DWL-P200
Power Over Ethernet
Adapters
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.

Advertisement

loading

Related Manuals for D-Link DWL-P200

Summary of Contents for D-Link DWL-P200

  • Page 1 If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.

  • Page 2: Base Unit

    Connecting The DWL-P200 Base Unit P+DATA OUT: provides the data and power to the terminal unit. Connect this port to the P+DATA IN on the Terminal unit. Power In: using the supplied 48V power LAN IN: connect an RJ-45 supply, connect to a straight-through cable to wall power outlet.
  • Page 3 Do Not mistake the “LAN IN” port with the “P + DATA OUT” port. Incorrectly plugging the wrong Ethernet cable into the wrong Ethernet port may cause serious damage to your network devices. D-Link will not replace or repair products or reimburse customers for devices that become damaged due to incorrect installation, nor is liable for any loss of business resulting in the incorrect installation of this product.
  • Page 4 Connecting The DWL-P200 Connect another Cat 5 Ethernet cable from the Base Unit “P + DATA OUT” to the “P+DATA IN” of the Terminal Unit. Use Voltage Selector to set DC output to 5V/2.5A or 12V/1A for the Network Device.
  • Page 5 Connecting The DWL-P200 Connect the provided Cat 5 Ethernet cable from the Terminal Unit “LAN OUT” to the RJ-45 LAN port of the Network Device. At this point, your Network Device should have power and data, and function normally.

  • Page 6: Specifications

    Specifications Category 5 Pin Usage . Data: 1, 2, 3, 6 . Power: 4, 5, 7, 8 Voltage . Input: 48VDC, 400mA DWL-P200 . Output: 5VDC, 2.5A or 12VDC, 1A Power Over Ethernet (Base Unit) Ethernet DWL-P200 . Connector: RJ-45...

  • Page 8: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.