D-Link DWS-1008 Cli Reference Manual page 52

DWS-1008 CLI Reference Guide
Examples: The following command displays all entries in the forwarding database:
DWS-1008# show fdb all
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG
-------- ------ -----------------------------
1
1
1
Total Matching FDB Entries Displayed = 3
The top line of the display identifies the characters to distinguish among the entry types.
The following command displays all entries that begin with the MAC address glob 00:
DWS-1008# show fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG
-------- ------ -----------------------------
1
1
Total Matching FDB Entries Displayed = 2
The table below describes the fields in the show fdb output.
Field
VLAN
TAG
Dest MAC/Route Des
CoS
Destination Ports
Protocol Type
Total Matching FDB
Entries Displayed
D-Link Systems, Inc.
Dest MAC/Route Des
00:01:97:13:0b:1f
aa:bb:cc:dd:ee:ff
00:0b:0e:02:76:f5
Dest MAC/Route Des
00:01:97:13:0b:1f
00:0b:0e:02:76:f5
Description
VLAN number.
VLAN tag value. If the interface is untagged, the TAG field is
blank.
MAC address of this forwarding entry's destination.
Type of entry. The entry types are explained in the first row of the
command output.
Note: This Class of Service (CoS) value is not associated with
MSS quality of service (QoS) features.
DWS-1008 switch port associated with the entry. A switch sends
traffic to the destination MAC address through this port.
Layer 3 protocol address types that can be mapped to this
entry.
Number of entries displayed by the command.
[CoS] Destination Ports
-------- -----------------------
1
* 3
1
[CoS] Destination Ports
-------- -----------------------
1
1
VLAN Commands
[Protocol Type]
--------------------
[ALL]
[ALL]
[ALL]
[Protocol Type]
--------------------
[ALL]
[ALL]
51