D-Link DWS-1008 Cli Reference Manual page 225

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008:
Table of Contents

Advertisement

DWS-1008 CLI Reference Guide
Usage:
Examples:
DWS-1008# show dap unconfigured
Total number of entries: 2
Serial Id
-----------------------------------------------------------------------------------------------------------------------
0333001287 DWL-8220AP
-----------------------------------------------------------------------------------------------------------------------
0333001285 DWL-8220AP
The table describes the fields in this display.
Field
----------------------------------------------------------------------------------------------------------------------
Serial ID
----------------------------------------------------------------------------------------------------------------------
Model
----------------------------------------------------------------------------------------------------------------------
IP Address
----------------------------------------------------------------------------------------------------------------------
Port
----------------------------------------------------------------------------------------------------------------------
VLAN
----------------------------------------------------------------------------------------------------------------------
D-Link Systems, Inc.
This command also displays an DWL-8220AP that is directly connected to
a switch, if the switch port to which the DWL-8220AP is connected
is configured as a network port instead of an DWL-8220AP access port, and
if the network port is a member of a VLAN. Entries in the command output's
table age out after two minutes.
The following command displays information for two Distributed APs
that are not configured:
Model
IP Address
10.3.8.54
10.3.8.57
Description
Serial ID of the Distributed AP
DWL-8220AP model number.
IP address of the DWL-8220AP. This is the address that the
DWL-8220AP receives from a DHCP server. The DWL-8220AP
uses this address to send a Find switch message to request
configuration information from switches. However, the DWL-
8220AP cannot use the address to establish a connection unless
the DWL-8220AP first receives a configuration from a switch.
Port number on which this switch received the DWL-8220AP's
Find switch message.
VLAN on which this switch received the DWL-8220AP's Find
switch message.
Access Point Commands
Port
Vlan
5
default
7
vlan-eng
224

Advertisement

Table of Contents
loading

Table of Contents