D-Link DWS-1008 Cli Reference Manual page 365

DWS-1008 CLI Reference Guide
area area
all
Defaults: None.
Access: Enabled.
Usage: If you do not use one of the optional parameters, configuration commands that set
nondefault values are displayed for all configuration areas. If you specify an area,
commands are displayed for that area only. If you use the all option, the display also
includes commands for configuration items that are set to their default values.
D-Link Systems, Inc.
Configuration area. You can specify one of the
following:
• aaa
• acls
• ap
• arp
• eapol
• httpd
• ip
• ip-config
• log
• ntp
• portconfig
• portgroup
• radio-profile
• rfdetect
• service-profile
• sm
• snmp
• snoop
• spantree
• system
• trace
• vlan
• vlan-fdb
If you do not specify a configuration area,
nondefault information for all areas is displayed.
Includes configuration items that are set to their
default values.
File Management Commands
364