D-Link DWS-1008 Cli Reference Manual page 85

DWS-1008 CLI Reference Guide
set snmp profile (continued)
all
Defaults: A default notification profile (named default) is already configured in MSS. All
notifications in the default profile are dropped by default.
Access: Enabled
Examples: The following command changes the action in the default notification profile from
DWS-1008# set snmp notify profile default send all
success: change accepted.
D-Link Systems, Inc.
• RFDetectDoSTraps - Generated when MSS detects a DoS
attack other than an associate request flood, reassociate
request flood, or disassociate request flood.
• RFDetectInterferingRogueAPTraps - Generated when an
interfering device is detected.
• RFDetectInterferingRogueDisappearTraps - Generated
when an interfering device is no longer detected.
• RFDetectSpoofedMacAPTraps - Generated when MSS
detects a wireless packet with the source MAC address of a
D-Link AP, but without the spoofed AP's signature (fingerprint).
• RFDetectSpoofedSsidAPTraps - Generated when MSS
detects beacon frames for a valid SSID, but sent by a rogue
AP.
• RFDetectUnAuthorizedAPTraps - Generated when MSS
detects the MAC address of an AP that is on the attack list.
• RFDetectUnAuthorizedOuiTraps - Generated when a
wireless device that is not on the list of permitted vendors is
detected.
• RFDetectUnAuthorizedSsidTraps - Generated when an
SSID that is not on the permitted SSID list is detected.
Sends or drops all notifications.
drop to send for all notification types:
IP Services Commands
84