D-Link DWS-1008 Cli Reference Manual page 324

DWS-1008 CLI Reference Guide
Type the following command to display 802.1X statistics:
DWS-1008# show dot1x stats
802.1X statistic
----------------
Enters Connecting:
Logoffs While Connecting:
Enters Authenticating:
Success While Authenticating: 0
Timeouts While Authenticating: 52
Failures While Authenticating: 0
Reauths While Authenticating: 0
Starts While Authenticating:
Logoffs While Authenticating: 0
Starts While Authenticated:
Logoffs While Authenticated:
Bad Packets Received:
The table below explains the counters in the show dot1x stats output.
Field
Enters Connecting
Logoffs While
Connecting
Enters Authenticating Number of times that the state wildcard
Success While
Authenticating
Timeouts While
Authenticating
Failures While
Authenticating
Reauths While
Authenticating
D-Link Systems, Inc.
value
-----
709
467
show dot1x stats Output
Description
Number of times that the switch state
transitions to the CONNECTING state from
any other state.
Number of times that the switch state
transitions from CONNECTING to
DISCONNECTED as a result of receiving
an EAPoL-Logoff message.
transitions.
Number of times the switch state
transitions from AUTHENTICATING from
AUTHENTICATED, as a result of an EAP-
Response/Identity message being received
from the supplicant (client).
Number of times that the switch
state wildcard transitions from
AUTHENTICATING to ABORTING.
Number of times that the switch
state wildcard transitions from
AUTHENTICATION to HELD.
Number of times that the switch
state wildcard transitions from
AUTHENTICATING to ABORTING, as
a result of a reauthentication request
(reAuthenticate = TRUE).
112
31
85
1
0
802.1x Management Commands
323