Set Trace Dot1X; Set Trace Sm - D-Link DWS-1008 Cli Reference Manual
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
set trace dot1x
Traces 802.1X sessions.
Syntax: set trace dot1x [mac-addr mac-address] [port port-num] [user username]
[level level]
mac-addr mac-
address
port port-num
user username
level level
Defaults: The default trace level is 5.
Access: Enabled.
Examples: The following command starts a trace for the 802.1X sessions for MAC
DWS-1008# set trace dot1x mac-addr 00:01:02:03:04:05:
success: change accepted.
set trace sm
Traces session manager activity.
Syntax: set trace sm [mac-addr mac-address] [port port-num] [user username] [level
level]
mac-addr mac-
address
D-Link Systems, Inc.
Traces a MAC address. Specify a MAC
address, using colons to separate the
octets (for example, 00:11:22:aa:bb:cc).
Traces a port number. Specify a switch
port number between 1 and 8.
Traces a user. Specify a username of up
to 80 alphanumeric characters with no
spaces.
Determines the quantity of information
included in the output. You can set the
level with an integer from 1 to 10, where
level 10 provides the most information.
Levels 1 through 5 provide user-readable
information. If you do not specify a level,
level 5 is the default.
address 00:01:02:03:04:05:
Traces a MAC address. Specify a MAC
address, using colons to separate the
octets (for example, 00:11:22:aa:bb:cc).
Trace Commands
371
Advertisement
Table of Contents
