D-Link DWS-1008 Cli Reference Manual page 144
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
set location policy (continued)
vlan operator
vlan-glob
user operator
user-glob
before rule-number Inserts the new location policy rule in front of another rule in the
modify
rule-number
port port-list
Defaults: By default, users are permitted VLAN access and assigned security ACLs according
to the VLAN-Name and Filter-Id attributes applied to the users during normal
authentication and authorization.
Access: Enabled.
D-Link Systems, Inc.
VLAN-Name attribute assigned by AAA and condition by which to
determine if the location policy rule applies. Replace operator with one
of the following operands:
eq - Applies the location policy rule to all users assigned VLAN names
matching vlan-glob.
neq - Applies the location policy rule to all users assigned VLAN names
not matching vlan-glob. For vlan-glob, specify a VLAN name, use the
double-asterisk wildcard character (**) to specify all VLAN names, or
use the single-asterisk wildcard character (*) to specify a set of VLAN
names up to or following the first delimiter character, either an at sign
(@) or a period (.).
Username and condition by which to determine if the location policy
rule applies. Replace operator with one of the following operands:
eq - Applies the location policy rule to all usernames matching
user-glob.
neq - Applies the location policy rule to all usernames not matching
user-glob. For user-glob, specify a username, use the double-asterisk
wildcard character (**) to specify all usernames, or use the
single-asterisk wildcard character (*) to specify a set of usernames up
to or following the first delimiter character, either an at sign (@) or
a period (.).
location policy. Specify the number of the existing location policy rule.
(To determine the number, use the show location policy command.)
Replaces the rule in the location policy with the new rule. Specify
the number of the existing location policy rule.
(To determine the number, use the Show location policy command.)
List of physical port(s) by which to determine if the location policy rule
applies.
AAA Commands
143
Advertisement
Table of Contents
