Show Trace - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
port port-num
user username
level level
Defaults: The default trace level is 5.
Access: Enabled.
Examples: Type the following command to trace session manager activity for MAC address
DWS-1008# set trace sm mac-addr 00:01:02:03:04:05:
success: change accepted.

show trace

Displays information about traces that are currently configured on the switch, or all possible
trace options.
Syntax: show trace [all]
all
Defaults: None.
Access: Enabled.
Examples: To view the traces currently running, type the following command:
DWS-1008# show trace
milliseconds spent printing traces: 1885.614
Trace Area
--------------
dot1x
sm
D-Link Systems, Inc.
Traces a port number. Specify a switch
port number between 1 and 8.
Traces a user. Specify a username of up
to 80 alphanumeric characters, with no
spaces.
Determines the quantity of information
included in the output. You can set the
level with an integer from 1 to 10, where
level 10 provides the most information.
Levels 1 through 5 provide user-readable
information. If you do not specify a level,
level 5 is the default.
00:01:02:03:04:05:
Displays all possible trace options and their
configuration.
Level Mac
--------------
5
5
User Port Filter
------- ---------------
0
0
Trace Commands
372