D-Link DWS-1008 Cli Reference Manual page 218

DWS-1008 CLI Reference Guide
-----------------------------------------------------------------------------------------------------------------------
CPU info
-----------------------------------------------------------------------------------------------------------------------
Uptime
Radio 1 type
Radio 2 type
-----------------------------------------------------------------------------------------------------------------------
operational channel
-----------------------------------------------------------------------------------------------------------------------
operational power
-----------------------------------------------------------------------------------------------------------------------
base mac
-----------------------------------------------------------------------------------------------------------------------
bssid, ssid
-----------------------------------------------------------------------------------------------------------------------
Port
-----------------------------------------------------------------------------------------------------------------------
Flg
-----------------------------------------------------------------------------------------------------------------------
IP Address
-----------------------------------------------------------------------------------------------------------------------
Model
-----------------------------------------------------------------------------------------------------------------------
MAC Address
-----------------------------------------------------------------------------------------------------------------------
Radio1
Radio2
-----------------------------------------------------------------------------------------------------------------------
Uptime
D-Link Systems, Inc.
Specifications and identification of the CPU.
For DWL-8220AP models other than DWL-8220AP-1xx or
DWL-8220AP-2xx, the ID portion of this field is not applicable.
Amount of time since the DWL-8220AP booted using this link.
802.11 type and configuration state of the radio.
• The configure succeed state indicates that the DWL-8220AP
has received configuration parameters for the radio and the
radio is ready to accept client connections.
• For 802.11b/g radios, 802.11b protect indicates that the radio is
in 802.11b protection mode and is therefore operating only at
802.11b rates.
• Sweep Mode indicates that a disabled radio is nonetheless
participating in rogue detection scans. Even though this message
appears only for disabled radios, all radios, enabled or disabled,
participate in rogue detection.
• Countermeasures Enabled indicates that the radio is sending
countermeasures packets to combat a rogue.
The channel on which the radio is currently operating.
The power level at which the radio is currently operating.
Base MAC address of the radio.
SSIDs configured on the radio and their BSSIDs.
Switch port number connected to the DWL-8220AP.
Operational status flags for the DWL-8220AP.
For flag definitions, see the key in the command output.
IP address of the DWL-8220AP. The address is assigned to the
DWL-8220AP by a DHCP server.
Note: This field is applicable only if the DWL-8220AP is configured
on the switch as a Distributed AP.
DWL-8220AP model number.
MAC address of the DWL-8220AP.
State, channel, and power information for radio 1:
• The state can be D (disabled) or E (enabled).
• The channel and power settings are shown as channel/power.
State, channel, and power information for radio 2.
Amount of time since the DWL-8220AP booted using this link.
Access Point Commands
217