D-Link DWS-1008 Cli Reference Manual page 262

DWS-1008 CLI Reference Guide
Mrouter-Term
Mrouter-Sol
DVMRP
PIM V1
PIM V2
Topology notifications: 0
Packets with unknown IGMP type: 0
Packets with bad length: 0
Packets with bad checksum: 0
Packets dropped: 4
Field
VLAN
IGMP is enabled
(disabled)
Proxy reporting
Mrouter solicitation
Querier functionality Pseudo-querier state.
Configuration values
(qi)
Configuration values
(oqi)
Configuration values
(qri)
Configuration values
(lmqi)
Configuration values
(rvalue)
Multicast router
information
Port
Mrouter-IPaddr
Mrouter-MAC
D-Link Systems, Inc.
0
50
4
0
0
Output for show igmp
Description
VLAN name. MSS displays information
separately for each VLAN.
IGMP state.
Proxy reporting state.
Multicast router solicitation state.
Query interval.
Other-querier-present interval.
Query response interval.
Last member query interval.
Robustness value.
List of multicast routers and active
multicast groups. The fields containing this
information are described separately. The
show igmp mrouter command shows the
same information.
Number of the physical port through which
the switch can reach the router.
IP address of the multicast router interface.
MAC address of the multicast router
interface.
0 0
101 0
4 0
0 0
0 0
IGMP Snooping Commands
261