D-Link DWS-1008 Cli Reference Manual page 148
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
mobility-profile
(network access
mode only)
service-type
D-Link Systems, Inc.
Mobility Profile attribute for the user.
Type of access the user is
requesting.
AAA Commands
• Use acl-name.in to filter
traffic that enters the switch
from users via an access
port or wired authentication
port, or from the network
via a network port.
• Use acl-name.out to filter
traffic sent from the switch
to users via an access port
or wired authentication port,
or from the network via a
network port.
Note: If the Filter-Id value
returned through the
authentication and
authorization process does
not match the name of
a committed security ACL in
the switch, the user fails
authorization and is unable
to authenticate.
Name of an existing Mobility
Profile, which can be up to
32 alphanumeric characters,
with no tabs or spaces.
Note: If the Mobility Profile
feature is enabled, and a user
is assigned the name of a
Mobility Profile that does not
exist on the switch, the user is
denied access.
One of the following numbers:
• 2 - Framed; for network user
access
147
Advertisement
Table of Contents
