D-Link DWS-1008 Cli Reference Manual page 202

DWS-1008 CLI Reference Guide
set service-profile ssid-name
Configures the SSID name in a service profile.
Syntax:
name
ssid-name
Defaults:
Access:
Examples:
DWS-1008# set service-profile clear_wlan ssid-name guest
success: change accepted.
set service-profile ssid-type
Specifies whether the SSID managed by a service profile is encrypted or unencrypted.
Syntax:
name
clear
crypto
Defaults:
Access:
Examples:
DWS-1008# set service-profile clear_wlan ssid-type clear
success: change accepted.
D-Link Systems, Inc.
set service-profile name ssid-name ssid-name
Service profile name.
Name of up to 32 alphanumeric characters, with no spaces with quote mark
(") before and after the SSID.
The default SSID type is crypto (encrypted) and the default name is dlink.
Enabled.
The following command applies the name guest to the SSID managed
by service profile clear_wlan:
set service-profile name ssid-type [clear | crypto]
Service profile name.
Wireless traffic for the service profile's SSID is not encrypted.
Wireless traffic for the service profile's SSID is encrypted.
The default SSID type is crypto.
Enabled
The following command changes the SSID type for service profile
clear_wlan to clear:
Access Point Commands
201