Rollback Security Acl - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Syntax: hit-sample-rate seconds
seconds
disables
Defaults: By default, the hits are not sampled.
Access: Enabled
Usage: To view counter results for a particular ACL, use the show security acl info acl-name
command. To view the hits for all security ACLs, use the show security acl hits
command.
Examples: The first command sets MSS to sample ACL hits every 15 seconds.The second and
DWS-1008# hit-sample-rate 15
DWS-1008# show security acl info acl_153
ACL information for acl_153
set security acl ip acl_153 (hits #3 916)
1. permit IP source IP 20.1.1.1 0.0.0.0 destination IP any enable-hits
DWS-1008# show security acl hits
ACL hit counters
Index Counter
-------------------------------------------
1 0
2 0
3 916

rollback security acl

Clears changes made to the security ACL edit buffer since it was last saved. The ACL is rolled
back to its state after the last commit security acl command was entered. All uncommitted
ACLs in the edit buffer are cleared.
D-Link Systems, Inc.
Number of seconds between samples. A sample rate of 0 (zero)
the sample process.
third commands display the results. The results show that 916 packets matching
security acl_153 were sent since the ACL was mapped.
ACL-name
acl_2
acl_175
acl_153
Security ACL Commands
274