D-Link DWS-1008 Cli Reference Manual page 112

DWS-1008 CLI Reference Guide
show snmp status (continued)
Field
SNMP minimum security
System Name
System location
System contact
SNMP engine ID
SNMP engine boots
SNMP engine time
SNMP max message size Maximum length, in bytes, of SNMP messages sent by this
D-Link Systems, Inc.
Description
Lowest (least secure) security level set on the switch:
• authenticated - SNMP message exchanges are
authenticated but are not encrypted.
• auth-req-unsec-notify - SNMP message exchanges are
authenticated but are not encrypted, and notifications
are neither authenticated nor encrypted.
• encrypted - SNMP message exchanges are
authenticated and encrypted.
• unsecured - SNMP message exchanges are not
secure.
String configured by the set system name command.
String configured by the set system location command.
String configured by the set system contact command.
Unique ID of this SNMP engine.
Number of times the SNMP engine has booted. This number is
at least as great as the number of times the switch has booted.
Number of seconds since the SNMP engine was rebooted.
SNMP engine.
IP Services Commands
111