D-Link DWS-1008 Cli Reference Manual page 147

DWS-1008 CLI Reference Guide
set mac-user attr (continued)
Syntax: set mac-user mac-addr attr attribute-name value
mac-addr
attribute-name value
Defaults: None
Access: Enabled.
Usage: To change the value of an attribute, enter set mac-user attr with the new value.
To delete an attribute, use clear mac-user attr.
Attribute
encryption-type
end-date
filter-id (network
mode only)
D-Link Systems, Inc.
MAC address of the user, in hexadecimal numbers separated
by colons (:). You can omit leading zeros.
Name and value of an attribute you are using to authorize the
MAC user for a particular service or session characteristic.
Authentication Attributes for Local Users
Description
Type of encryption required for
access by the client. Clients
who attempt to use an
unauthorized encryption method
are rejected.
Date and time after which the user is
no longer allowed to be on the network. format: YY/MM/DD-HH:MM
Security access control list (ACL),
to permit or deny traffic
received (input) or sent (output)
by the switch.
AAA Commands
Valid Value(s)
1 - AES_CCM
2 - Reserved
4 - TKIP
8 - WEP_104 (default)
16 - WEP_40
32 - No Encryption
64 - Static WEP
In addition to these values, you can
specify a sum of them for a
combination of allowed encryption
types.
For example, to specify WEP_104
and WEP_40, use 24.
Date and time, in the following
You can use end-date alone
or with start-date. You also
can use start-date, end-date,
or both in conjunction with
time-of-day.
Name of an existing security
ACL, up to 253 alphanumeric
characters, with no tabs or
spaces.
146