D-Link DWS-1008 Cli Reference Manual page 333

DWS-1008 CLI Reference Guide
(Additional show sessions network verbose
Ou describes the additional fields of the verbose output of show sessions network
commands.)
The following command displays information about network session 27:
DWS-1008> show sessions network session-id 27
Global Id: SESS-27-000430-835586-58dfe5a
State: ACTIVE
Port/Radio: 3/1
MAC Address: 00:00:2d:6f:44:77
User Name: EXAMPLE Natasha
IP Address: 10.10.40.17
Vlan Name: vlan-eng
Tag: 1
Session Timeout: 1800
Authentication Method: PEAP, using server 10.10.70.20
Session statistics as updated from AP:
Unicast packets in: 653
Unicast bytes in: 46211
Unicast packets out: 450
Unicast bytes out: 50478
Multicast packets in: 317
Multicast bytes in: 10144
Number of packets with encryption errors: 0
Number of bytes with encryption errors: 0
Last packet data rate: 2
Last packet signal strength: -67 dBm
Last packet data S/N ratio: 55
For descriptions of the fields of show sessions network session-id output, see the table
below.
Field
User Name
Sess ID
IP or MAC
Address
VLAN Name
Port/Radio
D-Link Systems, Inc.
Description
Up to 30 characters of the name of the
authenticated user of this session.
Locally unique number that identifies this
session. An asterisk (*) next to the session ID
indicates currently active sessions.
IP address of the session user, or the user's
MAC address if the user has not yet received an
IP address.
Name of the VLAN associated with the session.
Number of the port and radio through which the
user is accessing this session.
Session Management Commands
332