Crypto Generate Request - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide

crypto generate request

Generates a Certificate Signing Request (CSR). This command outputs a PEM-formatted
PKCS #10 text string that you can cut and paste to another location for delivery to a certificate
authority.
This command generates either an administrative CSR for use with an EAP CSR for use with
802.1X clients.
Syntax: crypto generate request {eap}
eap
After type the command, you are prompted for the following variables:
Country Name
string
State Name
string
Locality Name
string
Organizational Name
string
Organizational Unit
string
Common Name
string
Email Address
string
Unstructured Name
string
D-Link Systems, Inc.
Generates a request for an EAP certificate to authenticate the switch
to 802.1X supplicants (clients).
(Optional) Specify the abbreviation for the country
in which the switch is operating, in 2 alphanumeric
characters with no spaces.
(Optional) Specify the abbreviation for the name of the
state, in 2 alphanumeric characters with no spaces.
(Optional) Specify the name of the locality, in up to 80
alphanumeric characters with no spaces.
(Optional) Specify the name of the organization, in up to
80 alphanumeric characters with no spaces.
(Optional) Specify the name of the organizational unit, in
up to 80 alphanumeric characters with no spaces.
Specify a unique name for the switch, in up to 80
alphanumeric characters with no spaces. Use a
fully qualified name if such names are supported on your
network. This field is required.
(Optional) Specify your email address, in up to 80
alphanumeric characters with no spaces.
(Optional) Specify any name, in up to 80 alphanumeric
characters with no spaces.
Cryptography Commands
292