D-Link DWS-1008 Cli Reference Manual page 339

DWS-1008 CLI Reference Guide
Examples:
DWS-1008# clear rfdetect vendor-list client aa:bb:cc:00:00:00
success: aa:bb:cc:00:00:00 is no longer in client vendor-list.
set rfdetect attack-list
Adds an entry to the attack list. The attack list specifies the MAC address of devices that MSS
should issue countermeasures against whenever the devices are detected on the network.
The attack list can contain the MAC addresses of APs and clients.
Syntax: set rfdetect attack-list mac-addr
mac-addr
Defaults:
Access:
Usage: The attack list applies only to the switch on which the list is configured.
switches do not share attack lists.
Examples: The following command adds MAC address aa:bb:cc:44:55:66 to the attack
DWS-1008# set rfdetect attack-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now in attacklist.
set rfdetect black-list
Adds an entry to the client black list. The client black list specifies clients that are not allowed
on the network. MSS drops all packets from the clients on the black list.
Syntax: set rfdetect black-list mac-addr
mac-addr
Defaults: The client black list is empty by default.
Access: Enabled.
Usage: In addition to manually configured entries, the list can contain entries added
by MSS. MSS can place a client in the black list due to an association,
reassociation or disassociation flood from the client.
The client black list applies only to the switch on which the list is configured. Switches do
not share client black lists.
Examples: The following command adds client MAC address 11:22:33:44:55:66 to the
DWS-1008# set rfdetect black-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now blacklisted.
D-Link Systems, Inc.
The following command removes client OUI aa:bb:cc:00:00:00 from the
permitted vendor list:
MAC address you want to attack.
The attack list is empty by default.
Enabled.
list:
MAC address you want to place on the black list.
black list:
RF Detection Commands
338