Crypto Pkcs - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide

crypto pkcs12

Unpacks a PKCS #12 object file into the certificate and key storage area on the switch.
This object file contains a public-private key pair, a DWS-1008 switch certificate signed by a
certificate authority, and the certificate authority's certificate.
Syntax: crypto pkcs12 {eap} file-location-url
eap
file-location-url
Defaults: The password you enter with the crypto otp command must be the same as
Access: Enabled.
Usage: To use this command, you must have already created a one-time password with
You must also have the PKCS #12 object file available.You can download a PKCS #12 object
file via TFTP from a remote location to the local nonvolatile storage system on the switch.
Examples: The following commands copy a PKCS #12 object file for an EAP certificate and
key pair—and optionally the certificate authority's own certificate—from a TFTP server to
nonvolatile storage on the switch, create the one-time password hap9iN#ss, and unpack the
PKCS #12 file:
DWS-1008# copy tftp://192.168.253.1/2048full.p12 2048full.p12
success: received 637 bytes in 0.253 seconds [ 2517 bytes/sec]
DWS-1008# crypto otp eap hap9iN#ss
OTP set
DWS-1008# crypto pkcs12 eap 2048full.p12
Unwrapped from PKCS12 file:
keypair
device certificate
CA certificate
D-Link Systems, Inc.
Unpacks a PKCS #12 object file for an EAP certificate and key
pair - and optionally the certificate authority's own certificate - for
authenticating the switch to 802.1X supplicants (clients).
Location of the PKCS #12 object file to be installed. Specify a
location of between 1 and 128 alphanumeric characters, with no
spaces.
the one protecting the PKCS #12 file.
the crypto otp command.
Cryptography Commands
296